- 20 years shelf life
- Durable bromobutyl rubber construction (which meets CBRN protection standards)
- Full-face panoramic design with a large visor to enable a wide-angle view
- Fits up to two standard 40-mm 1/7” NATO filter cartridges
- Comes with a pre-installed hydration system and canteen. Note that the canteen has a capacity of 900 ml.
- Hypoallergenic inner mask prevents fogging, even under hard use
- Tested resistance to mustard gas penetration for nearly 30 hours
- Helmet-compatible
- Compatible with Camelback water bladders with a Type M adapter (not included)
- Used for industrial, agricultural, law enforcement, professional rescue, specialized welding, construction, and painting applications
- Meets all requirements under EN 136:1998, Class III
- Complies with all standards under EN 168 for impact protection, making this the perfect mask for riot control situations
- Carries MIRA Safety’s special 5 years manufacturer warranty
- Compatible with the TAPR-M Microphone and RVA (A.01) VPU Unit
The integrated speech diaphragm ensures at least 95% intelligibility of speech, allowing for easy communication with other members of your party. The mask is equipped with a six-point rubber-textile head harness to ensure a snug and lasting fit.
The CM-6M mask can be outfitted with a variety of filters. This is done by screwing to the left or right inhalation chamber. Note that the unused chamber (without filter) is sealed with an inhalation chamber plug. It is therefore necessary to ensure the plug is properly screwed and tightened.
Also keep in mind that the respirator’s inhalation chambers are ONLY compatible with Rd 40 x 1/7” thread in accordance with the EN 148-1 standard.
The tactical gas mask is compatible with the 3M Safety 6878 Spectacle Kit (sold separately), with simple installation for those who are vision impaired and prefer not to wear contacts.
The CM-6 tactical gas mask may be used in class 1 explosive environments only. The CM-6 mask meets all of the requirements for class 3 of the EN 136 standard. It’s a great choice for riot gear or as a riot control gas mask.
FILTER SOLD SEPARATELY
| 560g | 95% |
| 1 size | bromine-butyl rubber |
| Effective field of vision: 77.6% | polycarbonate |
| Overlapped field of vision: 83.8% | Rd 40 x 1/7" |
Breathing resistance at 30l/min. air flow:
| max. 30 Pa | max. 60 Pa |
STORAGE
The CM-6 tactical gas mask must be stored in a dark, cool and dust-free place free from sudden temperature changes. The storage room should be ventilated regularly. Temperatures may vary between 10°C and 25°C within relative humidity up to 65%. Full face gas masks must not be exposed to radiant heat or sunshine. Fuels, solvents, lubricants and other inflammable substances, including chemicals, must not be stored with masks. Moreover, there must not be any electrical machines or appliances that produce sparks or discharges during operation (ozone creation).
Avoid deformation of the rubber parts of the facepiece and internal CBRN gas mask during storage.
Manufactured in the Czech Republic